Product Description

INTAMSYS ABS-HS is an acrylonitrile-butadiene-styrene-based engineering filament developed specifically for high-speed fused filament fabrication.

According to INTAMSYS, ABS-HS increases melt flow from 9 g to 24 g, providing a flow rate up to 250% higher than standard ABS. This increased flow capability is intended to support faster material extrusion while maintaining reliable printed-part quality.

ABS-HS combines mechanical strength and toughness with heat resistance, dimensional stability, moderate processing temperatures, and improved resistance to warping. These characteristics make it suitable for engineering workflows where printing speed, repeatability, surface quality, and dimensional control are important.

The material’s good flow and processability help it form consistent layers during high-speed printing. Its dimensional stability and warping resistance are particularly useful when producing larger parts or geometries that may be difficult to manufacture reliably using conventional ABS.

The official Safety Data Sheet identifies ABS-HS as a solid filament with a relative density of 1.04 g/cm³ and a stated melting range of 220°C to 280°C. It is insoluble in water and is stable when stored under the recommended conditions.

ABS-HS is supplied in a 1.75 mm filament diameter. The 1 kg size is available in White, Black, Red, Green, Blue, Orange, and Grey. The 3 kg size is available in Black and White.

INTAMSYS officially lists ABS-HS as compatible with the FUNMAT PRO 310 NEO. The current public ABS-HS page also identifies HIPS as the related support material.

Large-spool compatibility: The standard FUNMAT PRO 310 NEO INTAMBox is specified for 1 kg spools. A 3 kg spool may require a compatible external spool holder or material-feeding solution. Confirm the feeding setup and spool dimensions before ordering.

Key benefits

  • Developed for high-speed FFF 3D printing
  • ABS-based engineering thermoplastic
  • Up to 250% higher flow rate than standard ABS, according to INTAMSYS
  • Melt-flow increase stated by INTAMSYS from 9 g to 24 g
  • High mechanical strength
  • Good toughness
  • Heat resistance
  • Good dimensional stability
  • Improved warping resistance
  • Good printed surface quality
  • Moderate processing temperatures
  • Easy processing
  • Compatible with the INTAMSYS FUNMAT PRO 310 NEO
  • Available in 1 kg and 3 kg spool sizes
  • Seven confirmed colors in the 1 kg size
  • Black and White available in the 3 kg size

Specifications

Specification Detail
Material Acrylonitrile-butadiene-styrene-based filament
Material abbreviation ABS-HS
Filament type High-speed engineering filament
Printing technology FFF
Filament diameter 1.75 mm
Available spool sizes 1 kg and 3 kg
1 kg colors White, Black, Red, Green, Blue, Orange, Grey
3 kg colors Black and White
Appearance Solid filament
Relative density 1.04 g/cm³
Melting range 220°C–280°C
Water solubility Insoluble
Odor Odorless or negligible
Mechanical properties High strength and toughness
Temperature resistance Heat resistant
Dimensional stability Good
Warping resistance Improved compared with conventional ABS, according to INTAMSYS
Surface quality Good
Flow performance Up to 250% higher flow rate than standard ABS, according to INTAMSYS
Stated melt-flow increase 9 g to 24 g
Compatible printer INTAMSYS FUNMAT PRO 310 NEO
Related support material INTAMSYS HIPS
Brand INTAMSYS

 

Typical applications

The official ABS-HS page describes the material as suitable for a wide range of applications but does not publish a specific verified application list.

Recommended listing wording:

  • High-speed engineering printing
  • Functional parts requiring strength and toughness
  • Parts requiring dimensional stability
  • Heat-resistant printed components
  • Industrial prototypes
  • Low-volume production components

Do not add automotive, aerospace, medical, food-contact, electrical-certification, or structural-load claims unless supported by separate official documentation for the intended application.

Compatibility

Compatible printer:

INTAMSYS FUNMAT PRO 310 NEO

Related support material:

INTAMSYS HIPS

Storage and handling

  • Store in a cool, dry location.
  • Protect the filament from water and moisture.
  • Protect it from direct sunlight and rain.
  • Avoid significant temperature fluctuations.
  • Keep away from excessive heat, flames, and ignition sources.
  • Maintain appropriate ventilation where the material is printed or melted.
  • Avoid direct contact with hot or molten material.
  • Wear protective gloves when handling hot or molten filament.
  • Wear protective eyewear where appropriate.
  • Avoid generating or inhaling dust during cutting, sanding, drilling, or finishing.
  • Maintain good housekeeping to prevent dust accumulation.
  • Dispose of the filament and packaging according to applicable local regulations.
  • Do not allow waste material to enter drains, surface water, or groundwater.

Customers also bought

    • FREE SHIPPING IN USA

      Free shipping with every order

    • SATISFACTION GUARANTEED 

      If your order arrives defective or fails to

      function properly, you will receive a full 100% refund!

    • PREMIUM CUSTOMER SUPPORT

      Connect with us through email, or

      phone, and we will address any questions you may have!

    • SECURE ENCRYPTED PAYMENTS

      We utilize advanced encryption to

      ensure there is never an issue with your privacy.